Real questions from towers, answered by the Shocker Hitch team.
Why is there unequal distance between the bump cushions and the main frame? One side has a very small gap and the other side has 1/4".
When completely setup and filled with air, it's meant to pivot between both sets of bump cushions, for equal cushioning effect in back and forth movement. Some air it up slightly more, pushing it further to one side.
What is max psi on the bag? I run a Reese Dual Cam (chain) on the 5th link it takes 80psi to get the cushion to be freed up. On the 6th link it takes 30 psi but the weight distribution is lessened.
The airbag on the Air Equalizer is rated for 100psi!
I tried to install one a couple years ago and I couldn't open the doors of my Chevy Express 350 van. I needed another 1/2 inch for clearance. Now I'm wondering if I was to put a 2" rise ball on my hitch if that would allow me to drop this hitch down enough to allow the doors to open. And....if so, is there a 2 5/16" ball with a 2" rise and a 1" shank available? I've found
You have the right idea on your first point! Because our Air Equalizer attaches to an adjustable XR base, dropping the hitch down on the channel is the perfect way to get the main body of the air-ride unit lowered out of the way. This should easily give you the extra 1/2 inch of clearance you need to fully open your van doors.
To compensate for that drop and keep your trailer level, using a raised hitch ball on your weight distribution (WD) head is a great thought. However, finding a 2-5/16" ball with a 2" rise and a 1" shank is going to be extremely difficult, if not impossible.
The reason comes down to safety and physics. A 2-5/16" ball is designed for heavy-duty towing. When you add a 2" rise to a hitch ball, it creates a massive amount of leverage and stress at the base of the ball. A 1" shank simply isn't thick enough to handle that kind of force under heavy loads. Because of this, major towing manufacturers almost exclusively make 2-5/16" balls with a 2" rise using a thicker 1-1/4" shank.
Since the Air Equalizer is designed so you can bolt your own existing weight distribution head directly to it, here is what I recommend: Check the ball hole size on your specific WD head.
If your WD head has a 1-1/4" hole: You are in luck! Many heavy-duty WD heads come with a 1-1/4" hole and use a spacer/bushing to fit 1" shanks. If that's the case, you can just remove the bushing and buy a standard 2-5/16" ball with a 2" rise and a 1-1/4" shank.
If your WD head only has a 1" hole: You unfortunately won't be able to safely use a 2" rise ball on that specific head. You may need to upgrade to a weight distribution head that accepts a 1-1/4" shank to safely make this configuration work.
Will this work with the Weigh Safe middleweight distribution hitch?
Please note that Weigh Safe manufactures their own style of shank designed specifically for their weight distribution system. Unfortunately, this shank is not compatible with our Equalizer system.
How much does this setup weigh? I have another brand now and quite frankly it's too heavy. Thanks
This product weighs 65 lbs.
can I invert the hitch to lower it so my tail gate wont hit the hitch? In other words turn the hitch upside down?
You can flip the XR Frame however you can not invert the airbag. The bag does have to be in the upright position for it to work.
What type of grease and lubricants do you recommend for care maintenance of the hitch
Any Extreme Duty 3% Moly.
If camping for a week, for example, is it necessary to deflate the airbag during that time?
It would be beneficial to release the air from the bag when it's not in use. While inflated, there is significant pressure that could make detaching difficult. Additionally, letting out the air helps prolong the life of the airbag and bushings by preventing them from being overstretched or over-compressed.
Even if you just let the air out to its natural level without manually squeezing it out, it will still be helpful. If you plan to keep the trailer and tow vehicle attached, this shouldn't be an issue, as the air pressure will be properly adjusted for the load and not overly compressed.
I already have a shocker hitch. Can I just get the part that hooks to the base I already have? I have the red one.
Our Equalizer and bumper pull hitches are not compatible. These are 2 different styles of towing.
Are there plans to make a larger capacity weight distribution Shocker hitch?
Sorry, at this time we do not have any plans to make anything over 12,000 lbs towing & 1,200 lbs tongue weight.
Can the shank be inverted?
You can flip the shank over, that is how you will get a higher rise.
Will this hitch help with porposing
The Shocker Air Equalizer is designed to absorb the forward n back jerking the trailer does to the truck. This jerking is where most porpoising starts when towing. In effect absorbing the jerking should greatly help with porpoising.
How do I store my my air equalizer hitch over winter or for about 7 months with the air left in it or take air out
You would want to let the air out if you are storing it separate/unhooked from the trailer. If you are storing it hooked up to a truck and trailer under load/tension then you would leave it aired.
Will the Shocker hitch work with my 2020 RAM coil spring rear suspension. I saw both yes and no in your q/a.
The Shocker Air Equalizer will work with the truck coil spring rear suspension. It will not work with the SUV coil spring rear suspension as it is softer suspension.
After setting up the Air Equalizer hitch with my Fastway e2 head and bars, I only require about 15psi to get the 1/8" clearance off of the truck side bump stop...Not the 40-60 as mentioned in the instructions. 20psi puts it almost exactly centered between the two stops. Is that ok or should I tweak it to distribute the load more? 8-9000 lb trailer 900lb tongue weight. 2020 GMC 2500HD long bed.
This is not a problem at all. Each truck and trailer will have different air pressure just depending on how heavy the trailer tongue weight is.
I'm looking at buying a Travel trailer style toy hauler with a GCVW of 13,000 lbs and hitch weight of 1600 lbs towing with a 2015 Ram 2500. Do you have an air equalizer for weight distribution that is capable of these specs?
Unfortunately, we do not, our air equalizer is rated for 12,ooo lbs.
What is the max air pressure I can put in? I have gone as high as 70psi and the forward cushion bump is still compressed and touching the hitch.
The maximum amount of air pressure the air bag is rated for is 100 PSI.
Will this work with the blue ox distribution hitch. Do you have any material you can send out.
Our Air Equalizer will work with Fastway E2, Equalizer, Reese, Husky, Pro Series, Torklift, Blue OX, Camco Eaz Lift & Curt round bar, Curt trutrack & trunnion head. This will not work with an Anderson Chain style Weight-distribution hitch.
Would I disconnect my trailer the same way I do now?
Thanks for reaching out, Todd. For the Shocker Air Equalizer, you would need a weight distribution hitch head to mount to the air equalizer. From that weight distribution head, you would indeed disconnect your trailer the same way you do now.
Shocker Air Equalizer for Weight Distribution Hitch-I have a 2015 GMC 2500, 2.5 hitch opening, Fastway E2, and a Minnie Winnie 2108FBS with a dry tongue weight of 364 lbs. Will this product work for me? Also, if I disconnect for a few days, should the air bag be deflated each time? Thank you
Our Equalizer would work with your setup! But taking into account the amount of tongue weight you have with your minnie winnie, the weight distribution is probably not needed. Our Shocker Air Hitch would be more beneficial to your set up and also works with other trailers. Thanks Gjordin
What is the weigh of the 3" WDH?
Hello the weight of the Air Equalizer and 3" XR frame is 52 pounds.
Are these available with a solid shank? Or is there a solid shank that can be used?
With our receiver tubes the only solid shank is the 2". With the 2-1/2" and 3" receiver tubes the shank in hallow.
Do you have to release and refill the air bag each time you connect and disconnect the trailer?
If you are not using the trailer and you have it disconnected you should let out air so you are not putting excessive pressure on the bump cushions.
Is there a way to lock this hitch?
We offer a locking pin set on our website, SH-61659-D is our 3 pin set that fit all Shocker bumper and receiver hitches. Thank you for choosing Shocker Hitch.
I have air bags on my GMC 2500HD Duramax… will the shocker hitch work or will it work against itself
Yes the Air Equalizer will work with air bags. This is because air bags and our hitch work in 2 different directions, air bags are for vertical and our hitches are for the horizontal surging.
What difference does the springs on the truck matter.Coil or leaf?
When used in SUVs with coil overs, the hitch and the coil overs tend to work against each other. In them working against each other it usually end in an unsatisfactory ride.
With pick ups our air equalizer can be used with rear coil over spring, it can not be used on SUV with coil overs.
I have a 2019 F250 and a KZ Confluence camper with a Blue Ox weight setup, which shock hitch should I go with?
Shocker Hitch offer an Air Equalizer that will fit the Blue Ox distribution head, it also fits a wide variety of other distribution heads. A list can be found on our Air Equalizer page.
which model can fit in Curt Trutrack WD
We recently redesigned the Air Equalizer to work with all Curt TruTrack systems.
What is the device you have shown in the last photo - it appears to lower the receiver height?
The drop receiver that our XR ball mount and Air Equalizer are mounted into in the picture is made by GEN-Y hitches. We actually do not carry that drop receiver hitch.
Will this fit a Bullet Proof HD2010 Rise/Drop hitch?
The Equalizer fits into our XR ball mounts that are a 3-3/4" vertical channel. Bullet Proof currently uses a 3" vertical channel.