Clevis Pin Mount w/ 1-1/4" Holes
Rated for your tow
20,000 lbs GTW · 2,000 lbs TW· 20,000 lbs GTW · 2,000 lbs TW
$235.18
$251.98 save $16.80
or as low as $20/mo with flexible financing — 4, 6, or 12 months. Options at checkout.
Fits Shocker Bumper Hitches
Works with Shocker Air, Super Drop, Streamline & HD series bumper hitches & Shocker XR series hitches & Impact series cushion hitches. Fits 3-3/4″ ID Shocker Bumper Hitch Channel.
Rise & Drop Range
3.5″ drop to 7.5″ of drop for Air Bumper Hitches. 1.5″ rise to 5.5″ drop on Impact Cushion Hitches. 3.5″ rise to 8.5″ drop on Shocker XR hitches.
Great for the Farm or Ranch
Great for transporting farm implement equipment & applications such as seed tenders, fertilizer spreaders, tillage equipment.
Mount Width
3-5/8" wide OD to fit a 3-3/4" hitch ID channel with a 4" on center hole pattern for a 5/8" pin for Shocker bumper hitches.
Stop destroying your trailer and cargo.
Every bump, pothole, and expansion joint sends a violent jolt through your trailer frame, damaging cargo and wearing out your truck. Shocker Air Ride Hitches absorb that punishment at the coupling, before it reaches your trailer.
Not everything you haul hooks to a ball. Tractors, seed tenders, fertilizer spreaders, and tillage equipment ride on a clevis pin, and without the right mount you're stuck at the barn. This Shocker Clevis Pin Mount drops into your Shocker bumper hitch and gives you 1-1/4" clevis holes to run a pin through, so pin-coupled implements pull off the same air-cushioned hitch that already takes the jolt out of rough ground and hard stops. It's rated to pull 20,000 lbs with 2,000 lbs of tongue weight, enough for the heaviest farm loads you'll drag down a gravel road or across a field. It fits the 3-3/4" channel on Shocker Air, Super Drop, Streamline, and HD series bumper hitches, Shocker XR series hitches, and Impact series cushion hitches. One note: it doesn't come with the clevis pin, so grab the size you run. Stocked in Canada and ships direct, no border wait.
Key Highlights
- Drops into the 3-3/4″ ID channel on Shocker Air, Super Drop, Streamline, and HD series bumper hitches, plus Shocker XR series and Impact series cushion hitches.
- Runs a 1-1/4" clevis pin so pin-coupled trailers and implements hook right up (pin not included, so grab the size you run).
- Pulls up to 20,000 lbs with 2,000 lbs of tongue weight, enough for your heaviest loaded implement.
- Sets your hitch height to match the load: 3.5″ to 7.5″ of drop on Air Bumper Hitches, 1.5″ rise to 5.5″ drop on Impact Cushion Hitches, and 3.5″ rise to 8.5″ drop on Shocker XR hitches.
- Built for the farm and ranch, hauling seed tenders, fertilizer spreaders, and tillage equipment.
- Measures 3-5/8" wide OD to slide into a 3-3/4" hitch ID channel, with a 4" on-center hole pattern for a 5/8" pin on Shocker bumper hitches.
Installation
Watch the official install walkthrough for this hitch — the exact steps and tools, straight from the manufacturer.
What It Fits
- Slides into the 3-3/4″ ID channel on Shocker Air, Super Drop, Streamline, and HD series bumper hitches, plus Shocker XR series hitches and Impact series cushion hitches.
- Built for farm and ranch work: seed tenders, fertilizer spreaders, and tillage equipment.
- Mount is 3-5/8" wide OD to fit a 3-3/4" hitch ID channel, with a 4" on-center hole pattern for a 5/8" pin on Shocker bumper hitches.
The Specs, and What They Do
The clevis has 1-1/4" holes for your pin, so pin-coupled equipment hooks straight up (the pin itself isn't included). It's rated to pull 20,000 lbs with 2,000 lbs of tongue weight, so it handles the heaviest implements you'll load. And you can dial in the ride height to keep your load sitting level: 3.5″ to 7.5″ of drop on Air Bumper Hitches, 1.5″ rise to 5.5″ drop on Impact Cushion Hitches, and 3.5″ rise to 8.5″ drop on Shocker XR hitches.
When a Clevis Mount Is the Right Call
If what you're towing hooks to a pin instead of a ball, this is the mount you want. That covers tractors, agricultural implements, and military-style trailers. If your trailer rides on a ball coupler, you'll want a ball mount instead.
$235.18
Still researching?
Skip the product wall — these are the four guides every buyer actually opens before they decide.
Installation Guide
Step-by-step videos for every Shocker family. What's in the box, what tools you need, and how long it takes.
Watch the installAir Pressure Setup
How to dial in air pressure by trailer weight so the ride is right the first time and the hitch lasts longer.
See psi by loadTowing Capacity Guide
Match GTW, tongue weight, and receiver size to your truck class so you don't over- or under-buy.
Read the guideConfigure Your Hitch
60-second fit quiz — answer a few questions about your truck and trailer, get a tailored recommendation.
Start the quiz
- 1-Year Manufacturer Warranty
- 60-Day Returns
- 20,000+ Customers
- Ships from Canada
