Shocker Raised Ball Mount Attachment
Rated for your tow
20,000 lbs GTW · 2,000 lbs TW· 20,000 lbs GTW · 2,000 lbs TW
$179.99 CAD
$218.38 save $38.39
or as low as $15/mo with flexible financing — 4, 6, or 12 months. Options at checkout.
SKU: SH-310125-25
Checking availability…
The details that matter
Product overview
The Shocker Raised Ball Mount attachment comes with a chrome 2-5/16" trailer hitch ball installed. This raised ball mount attachment features a 1-1/4" hole center hole for the hitch ball to mount through.
Check your fit before ordering
- Towing capacity limited by lowest rated component.
Full product description
The Shocker Raised Ball Mount attachment comes with a chrome 2-5/16" trailer hitch ball installed. This raised ball mount attachment features a 1-1/4" hole center hole for the hitch ball to mount through. Built for heavy duty bumper pull trailer towing. Ideal if you have a lower vehicle or a trailer with a higher tongue or ball coupler.
Compatible with Shocker Receiver Hitches: Works with Shocker Air, Streamline, Trail Force, Sport, Super Drop & HD series air receiver hitches & Shocker XR series receiver hitches, & Impact series cushion receiver hitches. Fits a 3-3/4" ID wide Shocker receiver hitch channel.
The drop and rise range varies by the Shocker Receiver Hitch this ball mount attachment is used with. The tow rating depends on the hitch ball used. The 2-5/16" hitch ball has a 20,000 lbs GTW & 2,000 lbs tongue weight. Made by Shocker Hitch, Jamestown, ND, USA.
All features & technical notes
Features
Raised Ball Mount Design: Raised ball mount attachment is often used when towing bumper pull camper trailers with higher tongue & ball coupler or with tow vehicles lower to the ground such as 2 wheel drive pickups, vans & suv's. Features 2-5/16" Chrome Hitch Ball Installed: Comes with the 2-5/16" trailer hitch ball pre-installed with lock washer & nut.
2-5/16" hitch ball has 20,000 lbs GTW & 2,000 tongue weight. Ball features a heavy-duty 1-1/4" diameter shank. Rise & Drop Range Depending on Shocker Receiver Hitch Used With: 8 hole Air Receiver Hitches are 2" of rise to 2" of drop. Super Drop is 2" of rise to 6" of drop. Trail Force is 2" of rise to 4-1/2" of drop.
Impact series hitch is 5" of rise to 3" drop. 8 hole XR hitch is 5" of rise to to 3" of drop. 10 hole XR hitch is 7" of rise to 5" of drop. Fits Shocker Receiver Hitches: Works with Shocker Air, HD, Streamline, Super Drop, Trail Force, Sport, Impact & XR series hitches. Fits a 3-3/4" ID wide Shocker bumper hitch channel.
Ball Shank Hole Diameter: Has a 1-1/4" hole inner diameter center hole in raised mount to bolt on a trailer hitch ball. 3-5/8" Wide Mount Width: is 3-5/8" wide OD to fit a 3-3/4" hitch ID channel with a 3" on center hole pattern for 5/8" pin.
Raised Mount Attachment Features a 2 Pin Design: Shocker ball mounts are designed with a 2 pin hole design for adjustability, maximum strength & durability. Safety Notice: Towing capacity limited by lowest rated component. Manufactured by Shocker Hitch® USA in Jamestown, ND.
Installation
Not sure this fits your setup?
These take a minute and save a return.
$179.99 CAD
More about this product range
The Shocker Impact cushioned ball mount comes with a 2" or 2-5/16" hitch ball is designed for towing boats, contractor equipment trailers, fish houses, skid steer trailers and more. It cushions the towing experience. The dual bump cushion design is rated up to 12,000 lbs. Featuring 4" of rise to 4" of drop. 12,000 lbs tow rating capacity and 1,200 lbs tongue weight. Use this Shocker Impact adjustable cushion ball mount however you need to for tons of versatility. Works great on pickup trucks, vans, suvs, cuvs and minivans. This is also the perfect cushioned ball mount for an RV or motorhome. Shocker Impact cushioned hitch ball mount provides the ultimate in versatility and a smoother towing experience than a solid ball mount. The Impact ball mount has built in adjustability maximum versatility with 7 adjustment holes for your all towing needs. This Shocker Impact cushioned adjustable ball mount attaches by sliding into a standard receiver tube. The shank has 2 holes for the hitch pin so you can adjust the length and it also works with hitch mounted mud flaps. The receiver shank has 2 hitch pin holes for adjustability but it will work with hitch mud towing mud flaps or with the shocker hitch towing flap system.
Tons of Attachments
We offer a wide variety of our ball mount attachments; standard mounts, drop ball mounts, clevis mounts, drawbar mounts, cushioned drawbar mounts, pintle hook attachments, raised mounts and combo multi-ball mounts.
Safety Notice
The Shocker Impact ball mount with cushions is a heavy duty unit that in most cases exceeds factory receiver hitch weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the receiver hitch that is mounted on your tow vehicle.
California Residents: Prop 65 Warning
Still researching?
Skip the product wall — these are the four guides every buyer actually opens before they decide.
Installation Guide
Step-by-step videos for every Shocker family. What's in the box, what tools you need, and how long it takes.
Watch the installAir Pressure Setup
How to dial in air pressure by trailer weight so the ride is right the first time and the hitch lasts longer.
See psi by loadTowing Capacity Guide
Match GTW, tongue weight, and receiver size to your truck class so you don't over- or under-buy.
Read the guideConfigure Your Hitch
60-second fit quiz — answer a few questions about your truck and trailer, get a tailored recommendation.
Start the quiz
- 1-Year Manufacturer Warranty
- 60-Day Returns
- 20,000+ Customers
- Ships from Canada
All configurations
| Configuration | SKU | Price |
|---|---|---|
| Includes 2-5/16″ Ball | SH-310125-25 | $179.99 |
| Includes 2″ Ball | SH-310125-2 | $179.99 |
| No Hitch Ball | SH-310125 | $139.99 |