Shocker 2-5/16″ Chrome Trailer Hitch Ball w/ 1-1/4″ Diameter 2-3/4″ Shank
$33.60
or as low as $3/mo with flexible financing — 4, 6, or 12 months. Options at checkout.
High Strength Steel with a
1-1/4" Diameter Shank that is 2-3/4" Long.
Works with Shocker Air receiver
hitches & Shocker ball mounts.
Precision Fit for an easy
& secure bolt in installation.
Fast Installation
Drop-in fit using standard hitch pins — no drilling, welding, or special tools required to install.
Stop destroying your trailer and cargo.
Every bump, pothole, and expansion joint sends a violent jolt through your trailer frame, damaging cargo and wearing out your truck. Shocker Air Ride Hitches absorb that punishment at the coupling, before it reaches your trailer.
A hitch ball takes a beating you never see. Every mile, your trailer's coupler grinds against it, and a worn or rusted ball starts to develop play. That play turns into chucking, clatter, and slop at the connection, and it chews up your coupler along with the ball. This Shocker 2-5/16" chrome-plated ball puts a fresh, hard surface back between truck and trailer, and the hard chrome finish shrugs off rust so it stays smooth instead of pitting and seizing. It carries 20,000 lbs of trailer and 2,000 lbs of tongue weight, so heavy loads don't faze it. The 1-1/4" diameter shank runs 2-3/4" long and bolts in with the included lock washer and nut, so you're not fighting the job. It's built to work with Shocker Air Receiver Hitches and the Shocker Streamline, XR, and Impact series hitches.
Key Highlights
- Drops right into Shocker Air receiver hitches and Shocker ball mounts.
- 2-5/16" ball with a hard chrome finish that fights off rust and stays smooth.
- High-strength steel with a 1-1/4" diameter shank, 2-3/4" long, so it holds up under a heavy load.
- Machined to a precise fit so it bolts in easy and stays secure.
- Comes with the clear zinc-plated lock washer and nut, so you have what you need to mount it.
- Rated to pull 20,000 lbs of trailer and carry 2,000 lbs of tongue weight.
What It Fits
- Drops into Shocker Air receiver hitches and Shocker ball mounts.
Specs and Features
- 2-5/16" ball with a hard chrome finish that fights off rust and stays smooth.
- High-strength steel shank, 1-1/4" diameter and 2-3/4" long, built to take a heavy pull.
- Machined to a precise fit so it bolts in easy and locks down tight.
- Comes with the clear zinc-plated lock washer and nut you need to mount it.
- Pulls 20,000 lbs of trailer and carries 2,000 lbs of tongue weight.
When to Swap the Ball
If your sway-control arm has worn the original ball loose, or the mini-ball seat on your trailer is damaged, drop in a fresh one before the slop gets worse. These are the same balls used in the SH-1001 sway control system, so you get an exact match.
$33.60
Still researching?
Skip the product wall — these are the four guides every buyer actually opens before they decide.
Installation Guide
Step-by-step videos for every Shocker family. What's in the box, what tools you need, and how long it takes.
Watch the installAir Pressure Setup
How to dial in air pressure by trailer weight so the ride is right the first time and the hitch lasts longer.
See psi by loadTowing Capacity Guide
Match GTW, tongue weight, and receiver size to your truck class so you don't over- or under-buy.
Read the guideConfigure Your Hitch
60-second fit quiz — answer a few questions about your truck and trailer, get a tailored recommendation.
Start the quiz
- 1-Year Manufacturer Warranty
- 60-Day Returns
- 20,000+ Customers
- Ships from Canada