
Shocker Drop Ball Mount w/2" Ball
Rated for your tow
10,000 lbs GTW · 1,000 lbs TW· 10,000 lbs GTW · 1,000 lbs TW
$201.58
$218.38 save $16.80
or as low as $17/mo with flexible financing — 4, 6, or 12 months. Options at checkout.
Fits Shocker Bumper Hitches
Works with Shocker Air, Streamline & HD series bumper hitches & Shocker XR series hitches & Impact series cushion hitches. Fits 3-3/4" Shocker Bumper Hitch Channel.
Drop Range
4-1/2" to 8-1/2" for Air Bumper Hitches. 0 to 7-1/2" Drop on Impact Cushion Hitches. 0 to up to 9" Drop on Shocker XR hitches.
3-5/8" Wide Ball Mount Width
3-5/8" wide OD to fit a 3-3/4" hitch ID channel with a 3" on center hole pattern for 5/8" pin for Shocker bumper hitches.
Up to 10,000 lbs GTW
2" hitch ball has 10,000 lbs tow & 1,000 tongue weight.
Stop destroying your trailer and cargo.
Every bump, pothole, and expansion joint sends a violent jolt through your trailer frame, damaging cargo and wearing out your truck. Shocker Air Ride Hitches absorb that punishment at the coupling, before it reaches your trailer.
A trailer that sits nose-high or nose-low fights you the whole way down the road. It chucks and sways behind the truck, wears your tires unevenly, and stops worse than it should. The Shocker Drop Ball Mount fixes that by letting you set the ball at the right height for your rig, and it ships with the 2" ball already on it. That 2" ball carries up to 10,000 lbs of trailer and 1,000 lbs on the tongue, so it hauls heavy without complaint. It drops into your existing Shocker bumper hitch through a 1-1/4" hole the ball mounts through, and how much drop you get depends on which Shocker hitch you run it on. It fits Shocker Air, Streamline, and HD series bumper hitches, Shocker XR series hitches, and Impact series cushion hitches, sliding into the 3-3/4" Shocker Bumper Hitch Channel. Stocked in Canada and shipped direct, so there's no border wait.
Key Highlights
- Drops straight into your existing Shocker Air, Streamline, HD, XR, or Impact cushion hitch, fitting the 3-3/4" Shocker Bumper Hitch Channel.
- Comes with the 2" ball already on it, ready for any trailer with a 2" coupler.
- 1-1/4" ball shank hole seats the ball solid and lets you swap it later.
- Sets your trailer level with 4-1/2" to 8-1/2" of drop on Air Bumper Hitches, 0 to 7-1/2" on Impact Cushion Hitches, and 0 up to 9" on Shocker XR hitches.
- Hauls up to 10,000 lbs of trailer with 1,000 lbs on the tongue on the 2" ball.
- 3-5/8" wide on the outside fits the 3-3/4" Shocker channel, with a 3" on-center hole pattern for a 5/8" pin.
Installation
Watch the official install walkthrough for this hitch — the exact steps and tools, straight from the manufacturer.
Compatibility
- Drops into your Shocker frame: works with Shocker Air, Streamline, and HD series bumper hitches, Shocker XR series hitches, and Impact series cushion hitches, and slides into the 3-3/4" Shocker Bumper Hitch Channel.
- Sized to slot right in: 3-5/8" wide on the outside to fit the 3-3/4" inside of a Shocker channel, with a 3" on-center hole pattern for a 5/8" pin.
Specifications & Features
- Comes with a 2" ball, ready to hook any trailer that runs a 2" coupler.
- 1-1/4" ball shank hole seats the ball solid and lets you swap it out down the road.
- Dials in your ride height: 4-1/2" to 8-1/2" of drop on Air Bumper Hitches, 0 to 7-1/2" on Impact Cushion Hitches, and 0 up to 9" on Shocker XR hitches, so you can level almost any trailer.
- Hauls up to 10,000 lbs: the 2" ball is rated for 10,000 lbs of trailer and 1,000 lbs on the tongue.
When to Choose This
Reach for this ball mount when you already run a Shocker bumper-pull air or cushion hitch frame and need to move to a 2" ball, change how much drop or rise you're set at, or replace a mount that's worn from years of hauling.
$201.58
Still researching?
Skip the product wall — these are the four guides every buyer actually opens before they decide.
Installation Guide
Step-by-step videos for every Shocker family. What's in the box, what tools you need, and how long it takes.
Watch the installAir Pressure Setup
How to dial in air pressure by trailer weight so the ride is right the first time and the hitch lasts longer.
See psi by loadTowing Capacity Guide
Match GTW, tongue weight, and receiver size to your truck class so you don't over- or under-buy.
Read the guideConfigure Your Hitch
60-second fit quiz — answer a few questions about your truck and trailer, get a tailored recommendation.
Start the quiz
- 1-Year Manufacturer Warranty
- 60-Day Returns
- 20,000+ Customers
- Ships from Canada












