Demco Metal Handle EZ Latch Trailer Coupler 2-5/16" Ball - Channel Mount - 21,000 lbs - Includes Four 1-1/2" x 5/8" diameter mounting bolts and 4 lock nuts
$208.32
or as low as $18/mo with flexible financing — 4, 6, or 12 months. Options at checkout.
Auto Latch Design with eZ-Latch
System (Latch pinhole is 5/16" & requires 3" long pin or lock which is not included).
Bolt on Installs to into
a 3" Wide Vertical Channel on Front of Trailer Tongue. Also used on Shocker Air Trailer Tongue Mounts.
Fits 3" ID / 3.5"
OD Channel with 2" on 2" center holes.
Includes Four 1-1/2" x 5/8"
diameter mounting bolts and Four lock nuts to secure to channel.
Stop destroying your trailer and cargo.
Every bump, pothole, and expansion joint sends a violent jolt through your trailer frame, damaging cargo and wearing out your truck. Shocker Air Ride Hitches absorb that punishment at the coupling, before it reaches your trailer.
A worn or sloppy coupler turns every hookup into a fight. It rattles on the ball, it drags on the latch, and it leaves you second-guessing whether it really grabbed before you pull out of the yard. This heavy-duty Demco coupler takes that worry off the table. It fits a 2-5/16" hitch ball and uses the eZ-Latch metal handle for a fast, sure grab: drop the coupler over your ball and it auto-latches on its own, so hooking up and disconnecting is quick and confident every time. Rated at 21,000 lbs, it bolts onto a 3" vertical channel on the front of your trailer tongue, and it is the same coupler we run on our Shocker Air Trailer Tongue Mounts. It ships with four 1-1/2" x 5/8" mounting bolts and four lock nuts, so you have what you need to fasten it to the channel.
Key Highlights
- Heavy-duty cast steel body (8-1/8" long x 2-7/8" wide) built to take real towing loads.
- eZ-Latch auto-latch system does the work for you (5/16" latch pinhole takes a 3" long pin or lock, not included).
- Lower it onto the ball and it latches on its own, no wrestling the handle.
- New metal latch that stays strong and holds up trip after trip.
- Fits a 2-5/16" hitch ball.
- Rated to tow 21,000 lbs.
- Black marine-grade powder-coated finish that stands up to weather and road salt.
- Fits a 3" ID / 3.5" OD channel with 2" on 2" center holes.
Check the Fit
- Fits a 2-5/16" hitch ball.
- Bolts to a 3" ID / 3.5" OD channel with 2" on 2" center holes.
Specs & Features
- Heavy-duty cast steel coupler built for real load (8-1/8" long x 2-7/8" wide).
- eZ-Latch auto-latch design that does the work for you (5/16" latch pinhole takes a 3" long pin or lock, not included).
- Lower it onto the ball and it auto-latches.
- New metal latch, durable and strong.
- 21,000 lbs tow rating.
- Black marine-grade powder-coated finish that shrugs off weather and road salt.
- Bolts into a 3" wide vertical channel on the front of the trailer tongue, and the same coupler used on Shocker Air Trailer Tongue Mounts.
- Includes four 1-1/2" x 5/8" diameter mounting bolts and four lock nuts to secure it to the channel.
- 1-Year Warranty.
When to Order Just a Coupler
Already running a Shocker tongue mount and the coupler is worn or damaged? A standalone Demco or Wallace coupler swaps out just the head, so you get a fresh, secure latch without replacing the whole tongue mount.
$208.32
Still researching?
Skip the product wall — these are the four guides every buyer actually opens before they decide.
Installation Guide
Step-by-step videos for every Shocker family. What's in the box, what tools you need, and how long it takes.
Watch the installAir Pressure Setup
How to dial in air pressure by trailer weight so the ride is right the first time and the hitch lasts longer.
See psi by loadTowing Capacity Guide
Match GTW, tongue weight, and receiver size to your truck class so you don't over- or under-buy.
Read the guideConfigure Your Hitch
60-second fit quiz — answer a few questions about your truck and trailer, get a tailored recommendation.
Start the quiz
- 1-Year Manufacturer Warranty
- 60-Day Returns
- 20,000+ Customers
- Ships from Canada
