Shocker Hitch — Air Ride Towing Hitches
ProductsSH-410-Welded
Weld On Trailer Tonque Vertical Channel Weld On Adaptor with 6 Bolt Holes
Air Ride

Weld On Trailer Tonque Vertical Channel Weld On Adaptor with 6 Bolt Holes

4.9 · 844 verified reviews

$176.40

or as low as $15/mo with flexible financing — 4, 6, or 12 months. Options at checkout.

Free shippingShips from Canada1-year warranty60-day returns
Air Ride
Out of Stock
Raw Steel
1
Patent #11,370,25720,000+ Customers

Equipped with 6 Adjustment Holes

- Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.

The outer front is 4"

wide, the outer rear is 11" wide. From front to back it measures 7-1/2".

Weight Rating

If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly welded onto the trailer and the coupler you are using can handle…

Convert your trailer a-frame to

one that accepts Vertical Channel couplers.

Stop destroying your trailer and cargo.

Every bump, pothole, and expansion joint sends a violent jolt through your trailer frame, damaging cargo and wearing out your truck. Shocker Air Ride Hitches absorb that punishment at the coupling, before it reaches your trailer.

Your trailer's A-frame was built for a horizontal coupler, so the vertical channel coupler you actually want to run won't bolt to it. Short of changing the tongue itself, you're stuck. This weld-on adapter fixes that. It converts a typical 50-degree trailer tongue into a vertical channel mount, so your A-frame accepts vertical channel couplers instead. Six adjustment holes on a 2" on-center bolt pattern line right up with typical vertical channel couplers, and the actual vertical channel measures 3-1/2" x 11-3/4". It's shaped to fit the tongue: 4" wide at the outer front, 11" wide at the outer rear, and 7-1/2" from front to back, all in premium-grade steel. Whether you're modifying an existing trailer or building one from scratch, this is how you get the coupler you need onto the frame you've got. Available completely welded, spot welded, or as just the components.

Key Highlights

  • Welds onto your trailer's A-frame and turns it into a vertical channel mount.
  • Lets your A-frame take vertical channel couplers it was never built to accept.
  • 6 adjustment holes on a 2" on-center pattern give you room to line up the coupler; the channel itself runs 3-1/2" x 11-3/4".
  • Made to convert a typical 50-degree trailer tongue into a vertical channel.
  • Sized to fit the tongue: 4" wide at the outer front, 11" wide at the outer rear, 7-1/2" front to back.
  • Needs a professional weld to install, so it holds the way it's engineered to.
  • Built from premium-grade steel to carry the load.
  • Weight rating: 14,000 lbs with 2 bolts on the coupler, 20,000 lbs with 4, as long as it's properly welded on and your coupler can handle those numbers.

Specs and Fit

  • Vertical channel weld-on adapter that mounts to your trailer's A-frame.
  • Converts the A-frame so it accepts vertical channel couplers.
  • 6 adjustment holes on a 2" on-center bolt pattern to dial in the coupler; actual vertical channel is 3-1/2" x 11-3/4".
  • Converts a typical 50-degree trailer tongue into a vertical channel.
  • Outer front 4" wide, outer rear 11" wide, 7-1/2" from front to back.
  • Professional welding required for installation.
  • Premium-grade steel construction.
  • Weight rating: 14,000 lbs with 2 bolts holding the coupler, 20,000 lbs with 4, as long as it's properly welded onto the trailer and your coupler can handle those numbers.

When You Need Replacement Hardware

Mounting bolts, pins, plates, and shackles wear down over the years or go missing. These OEM-spec kits drop in for the originals so your Shocker hitch installs the way it was engineered to.

$176.40

Still researching?

Skip the product wall — these are the four guides every buyer actually opens before they decide.

  • 1-Year Manufacturer Warranty
  • 60-Day Returns
  • 20,000+ Customers
  • Ships from Canada