Shocker 14K Air Raised Hitch Sway Control Towing Kit - Fits 2-1/2"Hitch Has 2-5/16"Ball, 1 Sway Arm – Fits 2-1/2″Hitch Has 2-5/16″Ball, 1 Sway Arm

If your truck sits a little low or if your trailer tongue is higher, like on a camper, causing you to have sway issues when towing, then look no further. Our air ride hitch with a raised hitch ball & sway bars offers the ultimate trailer towing setup for taller or lifted pickup trucks that have trailer sway problems. The built in air ride system filters the bumps, jerks, tugs, trailer bounces and sways through the system, which also features dual bump cushions for maximum performance. The dual sway bars allow you to fine-tune things if trailer sway is a problem. We combined our Shocker air ride drop hitch with a sway control raised ball mount along with dual sway arm bars. This drop ball mount has 2 integrated sway tabs for mounting the friction sway control kits. This air-ride friction sway system provides you with the necessary tools for a shock-free, straight and smoother towing experience every mile. Shocker Hitch provides the ultimate smooth ride. This shock-absorbing hitch is an air suspension unit mounted between your pickup truck and trailer. It reduces damage to your equipment and makes towing easier on you, your passengers, animals, truck, trailer & cargo. Fits 2-1/2" Receiver Hitch - Has Raised Mount & Chrome 2-5/16" Ball with Sway Bar Mounting Tabs - Includes 2 Sway Bar Kits -Features 2" of Rise to 2" of drop: 2-5/16" ball rated at 14,000 lbs GTW. Great for towing bumper pull trailers with 2-5/16" ball coupler. If you are experiencing trailer sway while towing, then this heavy duty air ride sway control towing kit is perfect for you. Especially when towing a trailer, you may experience trailer sway from wind, passing vehicles, and rough, uneven road surfaces. The included dual sway control arm bars are made to prevent the trailer from swaying. We offer a sway control arm bar system kit that connects from the Shocker sway control ball mount with built-in sway bar mount tabs on the hitch, to the each side of the trailer a-frame. This sway control system is used to stiffen the connection between the truck and trailer, keeping it straight and in line with the towing vehicle. You will find the advantage of the Heavy Duty Air Shocker drop hitch is your ability to adjust air pressure for the trailer weight, best ride, comfort and load control. Textured safety red powder coated finish. The air bag sits under the receiver tube, allowing a short distance of 10-1/2" each between the mounting pin and the ball center. It offers 8 adjustment holes for 2" of rise to 2" of drop along with 14,000 lbs GTW & 1,400 lbs tongue weight. The 14K series Shocker Air Hitch® is proudly made in the USA by Shocker Hitch® in Jamestown, North Dakota, delivering durability, long-lasting performance, and a dramatically smoother towing experience every time you hit the road.

• Smoother Towing Every Mile with Sway Control Air Ride Towing Raised Hitch Kit: It improves the ride and makes towing a trailer smoother. Built-in air ride system offers a smoother towing experience. It absorbs road shock, tugs, jerks, bumps, bangs, and sways through the built in air ride suspension system, creating a smooth ride for the tow vehicle and the trailer. It directs the normal towing resistance between the tow vehicle and trailer through the air ride system, which produces a much smoother ride. It also naturally reduces trailer sway by filtering and absorbing the changing tongue weight that occurs when towing on uneven or rough roads. Dual urethane bump cushions offer extra performance on rougher roads and highways. Air ride system is designed with a built-in heavy duty air spring bag for years of heavy duty performance. Dual Sway Bars & Raised Ball with Sway Bar Mount Tabs: Get 2" of Rise to 2" of drop. Choose either a 2" or 2-5/16" chrome trailer hitch ball with 2 integrated sway bar tabs for mounting the two included friction sway control arm bar kits. Use 1 sway bar for trailers up to 10,000 lbs & 2 sway bars for trailers up to 20,000 lbs. The 1-1/4" ball with the sway kit, bolts to the sway bar mounting tab to hook up the sway arm bar to the receiver hitch that is connected to the trailer a-frame. A raised mount is often used if a trailer has a higher tongue or with a pickup, van or suv that is lower to ground. Dual Sway System is Great for Reducing Trailer Sway: Comes with two friction sway control arm bar kits. The air hitch smooths out the ride, while the friction sway control bars helps prevent side-to-side trailer movement. The adjustable friction bars lets you fine-tune your sway control. Saves Money & Reduces Damage to Trailer & Cargo: By reducing trailer breakage on both the trailer & contents. The Shocker hitch absorbs the damaging forces experienced with a typical hard connection. This greatly reduces the chances of breaking welds & doing other long-term damage to your equipment & valuable cargo. Plus by reducing the jerks, tugs, and sways, customers report fuel savings of getting 1 or more miles per gallon improvement. Easier on You, Passengers, Animals, Truck, Trailer & Cargo: This air receiver reduces stress and more relaxing on you, your passengers, animals, tow vehicle, trailer, cargo and equipment. Less stress makes for a more enjoyable experience. Industry Leading Rocker Pivot Design: Our shock-damping rocker arm pivot design allows for a down & back motion that filters the road shock into the integrated air ride system with dual bump cushions. Filters the road shock through the air spring bag & urethane cushions with the greaseable 1" diameter 1045 carbon steel pivot bolt. The 1" diameter pivot bolt allows for this pivoting rocker motion to happen smoothly. Improves Safety & Provides Comfort: By giving you improved control of your tow vehicle and trailer. The air ride receiver hitch system allows for better control of your pickup and the trailer it is towing. It's easier on you, your passengers, animals, cargo, and equipment. Easily Optimized Your Towing for Tow Weight, Best Ride & Load Control: Fine tune for your towing weight. Add or reduce air depending on the weight of your trailer & contents for ride comfort & load control. Just add air for heavier loads and reduce air pressure for lighter loads. Simple & Effective Pivoting, Shock Absorbing Design: Filters, dampens & absorbs the road shock through the air ride system & urethane cushions with the greaseable 1" diameter 1045 carbon steel pivot bolt. Uses a rocker arm pivot design which produces a down & back motion, much different than other air hitches on the market. Our design eliminates the need for slides, parallel linkages, rollers, shock absorbers, or multiple airbags. Sway Control Air Ride Receiver Towing Raised Hitch Kit Includes: Shocker air receiver raised hitch with built in 14K air ride system & dual bump cushions, choose a 2" or 2-5/16" chrome hitch ball with integrated sway bar mounting tabs on hitch side, 2 friction sway arm bar kits and three d-handle mount attachment pins with clips. Two for the mount attachment and one for your receiver. 14,000 lbs Hitch Weight Rating Capacity: 14,000 lbs gross trailer weight & 1,400 lbs tongue weight. (can vary by mount) 5/16" Thick Side Plates with 8 Adjustment Holes: Plenty of Adjustment. Perfect for bumper pull trailer towing. Thick carbon steel side plates & top plate, air spring & dual bump cushions. Available for 2" or 2-1/2 receiver Hitch: Choose for 2" & 2-1/2" receiver hitch tubes. The receiver shank has two hitch pin holes that allow for 1" of length adjustability on your vehicle's receiver hitch. If you need a 3" receiver, see our HD series air receiver hitches. Safety Red Powder Coat Finish: Impact-resistant premium safety red textured powder-coat finish on base frame & textured matte black on receiver shank & floating paddle. 20+ Ball Mount Options: Huge selection of ball mount attachments available from combo ball, drop, raised, drawbar, clevis pin, sway bar tab options, pintle hook, pintle & ball attachments, and more. The combo adjustable multi-ball mount has 2" & 2 5/16" hitch ball. Great for Pickups & SUVs with Receiver Under Bumper: Great for pickup trucks, vans and suv's with receiver under bumper. Popular installs include GMC Sierra, Chevy Silverado, Chevy Colorado, GMC Canyon, Dodge Ram, Ford Ranger, Maverick F150, F250, F350, F450, F550 Superduty, Toyota Tundra, Nissan Titan & Honda Ridgeline. Safety Notice: Towing capacity is limited by lowest rated component. Manufactured by Shocker Hitch® USA in Jamestown, ND. NOTE: This product will NOT work with a weight-distribution hitch system. If you have a W-D hitch, check out our Shocker Air Ride Weight Distribution Hitches.