Shocker 10K Streamline Aluminum Air Pintle Hitch - Fits 2" Hitch, 2-1/2" Rise 6-1/2" Drop

Wrestling a heavy steel hitch in and out of your receiver every weekend wears on your back, and salt spray and lake launches leave steel pitted and seized. The Shocker 10K Aluminum Streamline fixes both.

It is the lightest air ride hitch we make, with an all-aluminum frame, 2-inch shank, and paddle that cut the weight roughly in half versus our steel hitches, so you can lift it in and out one-handed. It hauls up to 10,000 lbs GTW, rides on the same built-in air ride, and comes ready for a pintle hook mount set at 2.5" Rise to 6.5″ Drop.

Aluminum doesn't rust, so it stays clean for life and moves from truck to truck when you trade up.

Half the Weight: The aluminum frame, 2-inch shank, and paddle weigh roughly half what a comparable steel hitch does. If you drop your hitch in and out of the receiver every weekend, your back will feel the difference.

Rust-Proof for Life: Aluminum doesn't rust. Salt spray, road brine, lake launches, and coastal humidity won't pit, scale, or seize this hitch the way they eat away at steel.

Same Air Ride, Lighter Body: You get the same proven Shocker air bag and rocker-arm pivot that smooths out the ride, just hung on a lighter, corrosion-proof aluminum chassis.

Outlasts Your Truck: When you trade in your tow vehicle, this hitch comes with you. No rust pits, no flaking finish, no bolts seized into a corroded frame.

The 10,000 lb rating covers the vast majority of recreational trailers pulled by half-ton trucks and SUVs:

Boats and personal watercraft trailers, especially in salt water

Snowmobile and off-season storage trailers

Car trailers and small enclosed haulers

Ice houses and fish houses

Utility and landscaping trailers

Light dump and equipment trailers under 10,000 lbs

Any trailer where every pound of curb weight on the truck counts

Here is how the Aluminum Streamline lines up against the rest of our steel air ride family:

Aluminum Streamline 10K: 10,000 lbs GTW, the lightest hitch we build and rust-proof for life. Best if you lift the hitch often or tow near salt water. It caps at 10K because aluminum isn't safe above that load.

Original Shocker 14K (Steel): 14,000 lbs GTW, heavier but easier on the wallet. The go-to pick when weight isn't a daily hassle and your loads can climb past 10K.

HD Max Black 20K (Steel): 20,000 lbs GTW, the heaviest and strongest we make. Built for three-quarter-ton and one-ton trucks pulling heavy goosenecks, dumps, and equipment trailers.

The Aluminum Streamline uses Shocker's standard ball mount attachment system. Pick a pintle hook mount with 2.5" Rise to 6.5″ Drop to set your trailer at the right height. Combo, drop, rise, clevis, drawbar, and pintle mounts are all on offer, including options with sway-control tabs.

Whatever you choose ships pre-paired with the base frame as a complete, tow-ready assembly.

Like every Shocker Hitch product, the 10K Aluminum Streamline is stocked in Canada and ships fast, with no border wait. The aluminum frame is precision-machined and finished in silver powder coat, and the air bag is the same multi-ply rubber unit used in commercial air suspension systems. Backed by Shocker Hitch's 60-day satisfaction guarantee.

Air ride towing technology with a heavy duty built in air spring to cushion the ride & absorb the road shock. Add instant air ride to your pickup & trailer.

Helps eliminate tugs, thumps, jerks & bumps felt when towing on rough roads or concrete highways. Built-in air ride system for a smoother towing experience. No more jarring every time you cross a section divider.

The all aluminum frame, shank and paddle offer a strong towing hitch, yet light-weight for attaching or removing & rust-proof design for years of great looks and performance.

Impact resistant premium powder-coat finish on base frame.

The road shock absorbing design creates a smooth ride & naturally reduces the tendency of trailer sway. Dual rubber bump cushions also offer additional performance.

Cushioned adjustable pintle hook ball mount. Fits 6″ OD x 2.5-3″ ID pintle rings. adjustable pintle hook with either 3″ to 7″ drop or 2-1/2″ rise to 6.5″ drop.

Pintle is rated for 10-ton but Aluminum Hitch is only rated for 10,000 lbs GTW – do not overload.

10,000 lbs towing capacity & 1,000 lbs tongue weight.

Fine-tune for your towing weight. Just add air for heavier loads.

Available for 2″ receiver hitch tubes and has two hitch pin holes for length adjustability.

Fits Great for Full Size Pickup Trucks & Vans, Midsize Pickups and select SUVS (with receiver under bumper). Popular installs include GMC Sierra, Chevy Silverado, Chevy Colorado, GMC Canyon, Dodge Ram, Ford Ranger, Maverick F150, F250, F350, F450, F550 Superduty, Toyota Tundra, Tacoma, Nissan Titan, Frontier, Honda Ridgeline & Hyundai Santa Cruz.

Effectively absorbs the jerking, tugging, and damaging forces experienced with a typical hard connection when towing trailers. There is no reason to beat yourself or your equipment up with a hard connection between your trailer and your receiver hitch.

By giving you improved control of your tow vehicle and trailer. The airbag receiver hitch system allows for better control of your pickup and the trailer it is towing.

uses a rocker arm pivot design which produces a down and back motion, much different than other air hitches on the market. Our design eliminates the need for slides, parallel linkages, rollers, shock absorbers, or multiple airbags common to other air hitches.

By reducing trailer breakage on both the trailer and the trailer contents! The Shocker hitch absorbs the damaging forces experienced with a typical hard connection. This greatly reduces the chances of breaking welds and doing other long-term damage to your equipment as well as the valuable cargo you have inside the truck and trailer.

By reducing wear and tear on driveline and frame! Treat yourself, your equipment, and your passengers to a much smoother ride. You’ll never go back to the ‘old days’ of continual bumps, jerks, and vibrations.

Aluminum Shocker air receiver hitch with built-in air ride system & dual bump cushions, 10 ton Pintle Hook and three D-handle ball mount attachment pins with clips.