Shocker Hitch — Air Ride Towing Hitches
ProductsSH-310875
Metric Raised Hitch Ball Mount Attachments (Australia / Europe Only) 22mm / 7/8" Hole

Metric Raised Hitch Ball Mount Attachments (Australia / Europe Only) 22mm / 7/8" Hole

4.9 · 844 verified reviews

Rated for your tow

· 16,000 lbs GTW · 1,600 lbs TW

$201.58

$218.38 save $16.80

or as low as $17/mo with flexible financing — 4, 6, or 12 months. Options at checkout.

Free shippingShips from Canada1-year warranty60-day returns
16KGTW
1.6KTW
Standard
Out of Stock
Black
1
Patent #11,370,25720,000+ Customers

Fits Shocker Bumper Hitches

Works with Shocker Air, Streamline & HD series bumper hitches & Shocker XR series hitches & Impact series cushion hitches. Fits 3-3/4″ Shocker Bumper Hitch Channel.

Mount Width

3-5/8″ wide OD to fit a 3-3/4″ hitch ID channel with a 3″ on center hole pattern for 5/8″ pin for Shocker bumper hitches.

Has 22mm metric (approx 7/8

inch hole) for a metric hitch ball to be bolted on (bolt hitch ball NOT included)

Choose from standard, off-road, drop

and raised ball mount attachments. (Hitch ball not included)

Stop destroying your trailer and cargo.

Every bump, pothole, and expansion joint sends a violent jolt through your trailer frame, damaging cargo and wearing out your truck. Shocker Air Ride Hitches absorb that punishment at the coupling, before it reaches your trailer.

Tow in Australia or Europe and your hitch ball runs on metric bolts, so a standard North American ball mount simply won't take it. That leaves you improvising with a ball that doesn't sit right, and that's the last thing you want riding between your truck and a loaded trailer. This Shocker ball mount attachment is drilled metric, with a 22mm hole (about 7/8″), so a 50mm or 70mm bolt-on hitch ball threads straight on (hitch ball not included). Choose from standard, euro, off-road, drop and raised shapes to match your ride height, then bolt on the ball your coupler calls for. It slides right into your Shocker Air, Streamline, HD, or XR bumper hitch and the Impact series cushion hitch, so the metric gear you already run finally has a mount sized for it. Stocked in Canada, so it ships direct with no border wait.

Key Highlights

  • Built for the metric towing setups run in Australia and Europe.
  • Drilled with a 22mm (about 7/8 inch) metric hole so your bolt-on hitch ball threads right on (bolt-on hitch ball not included).
  • Takes the 50mm or 70mm bolt-on hitch ball your coupler calls for.
  • Bolt-on ball hole size: 22 mm (7/8″ hole).
  • Comes in standard, off-road, drop and raised shapes to match your ride height (hitch ball not included).
  • Drops into Shocker Air, Streamline, HD, and XR bumper hitches plus Impact series cushion hitches, all with the 3-3/4″ Shocker bumper hitch channel.
  • The 3-5/8″ wide mount slides into the 3-3/4″ channel with a 3″ on-center hole pattern for the 5/8″ pin.

What It Fits

  • Drops into Shocker Air, Streamline, HD, and XR series bumper hitches plus Impact series cushion hitches, all built around the 3-3/4″ Shocker bumper hitch channel.
  • The 3-5/8″ wide mount slides into the 3-3/4″ channel and lines up on a 3″ on-center hole pattern for the 5/8″ pin.

The Specs

  • Made for the metric towing gear used in Australia and Europe.
  • 22mm metric hole (about 7/8 inch) so a metric hitch ball bolts straight on (bolt-on hitch ball not included).
  • Built to take a 50mm or 70mm bolt-on hitch ball.
  • Bolt-on ball hole size: 22 mm (7/8″ hole).
  • Pick from standard, off-road, drop and raised shapes to match your setup (hitch ball not included).

When to Choose This

Reach for this attachment when you already run a Shocker bumper-pull air or cushion hitch and need to move to a metric ball, change your drop or rise direction, or swap out a mount that's seen enough miles.

$201.58

Still researching?

Skip the product wall — these are the four guides every buyer actually opens before they decide.

  • 1-Year Manufacturer Warranty
  • 60-Day Returns
  • 20,000+ Customers
  • Ships from Canada