Shocker 14K Air Sway Control Raised Hitch

The red 14K Shocker Air Ride Receiver Hitch with a raised ball mount comes with a 2" or 2-5/16" chrome hitch ball with 2" of rise to 2" Drop. This raised hitch features sway bar mounting tabs. This raised ball mount was designed to hook friction sway bar arms and help reduce trailer sway for a smooth, straight pull.

To help eliminate any of the unwanted trailer sway problems, this mount has sway bar mount tabs that work with the Shocker friction sway arm bar kits or similar, which are sold separately. The pivoting air ride system filters the bumps and bangs through the air ride system naturally reduces sway, but if you need even more protection from trailer sway, this sway control raised air hitch really comes in handy.

The raised hitch option was designed for pulling campers with higher trailer tongues or lower pickup trucks. Shocker air ride hitch provides the ultimate smooth ride. It saves your equipment from the damaging forces experienced with a typical hard connection. You get a shock dampening action from our unique rocker arm pivot design, which produces a down and back motion, much different than other air hitches on the market.

Our design air ride hitch eliminates the need for slides, parallel linkages, rollers, shock absorbers, or multiple air spring bags common to other air hitches. The Shocker Air is a miniature air suspension unit mounted between your pickup truck and trailer. This Shock absorbing trailer hitch mounts by sliding into a standard receiver tube.

The Shocker air with standard ball mount is great for pickup trucks, vans, and select SUVs where the receiver tube is under the bumper. This shock-absorbing hitch is a must-have for smoother trailer towing. The built-in air spring bag lasts for years and does a wonderful job of smoothing out your towing experience by cushioning both your tow vehicle and the trailer.

The standard ball mount is black powder-coated with a bolted on chrome hitch ball for maximum strength. The air ride system sits under the receiver tube, allowing a short distance of 10-inches between the mounting pin and ball center. You will find the advantage of the Air Shocker is your ability to adjust air pressure for best ride and load control.

Have an CUV? Check out our Cushioned Ball Mounts. Manufactured by Shocker Hitch® USA in Jamestown, ND. Air receiver hitch is 14,000 lbs GTW & 1,400 lbs tongue weight. Note: The sway control tab mount is designed to work with the Shocker Sway control bar kit or similar, which are not included and is available separately.

Suggested to get 1 kit if towing under 10,000 lbs and 2 kits if towing over 10,000 lbs. California Residents: Prop 65 Warning